10
Error signals
.02
The following symbols may appear on the screen during sewing. They indicate the
corresponding errors.
Symbol
Error
Flap seam switched on but no
flap inserted.
Thread error.
Carry out sewing start.
Incorrect needle position.
Bobbin thread counter has run out.
Folding unit open.
Machine stop with left foot switch.
Sewing
Correction
Insert flap
Re-thread needle thread.
Turn balance wheel until error
signal goes off.
Change the bobbin. Acknowledge
correction by touching the
symbol.
Close folding unit.
Operate right foot switch. Return
main clamp without sewing.
10 - 2