BMW 730i Owner's Handbook Manual page 80

Explanatory text messages
Text messages on the info display illustrate the
importance of the indicator and warning lights
displayed.
You can subsequently call up additional infor-
mation for most Check Control messages, e.g.
the cause of a malfunction and what action is
required on your part, see Displaying further
information subsequently, page 78.
In urgent cases, this information will be shown
when the corresponding light comes on.
At the same time an acoustic signal sounds.
To exit the menu:
Arrow is selected. Press the controller.
Hiding Check Control messages
Press the button on the flashing turn indicator
lever.
78
Online Edition for Part no. 01 41 0 013 197 - © 02/07 BMW AG
Some Check Control messages will remain vis-
ible until the associated fault has been rectified.
These messages cannot be hidden. Should
several faults occur simultaneously, the Check
Control messages will be displayed consecu-
tively.
Other Check Control messages disappear
automatically after approx. 20 seconds, but
they remain memorised.
Displaying memorised Check Control
messages
Via the CHECK button
1. Press and hold down the button:
The first message stored is displayed.
2. Briefly press the button:
Every time you press the button, another
message is displayed.
Displaying further information
subsequently
iDrive, principle, see page 14.
1. Press the button to call up the start
menu.
2. Move the controller towards "On-board
data".