Automatic Air Conditioning - BMW 730i Owner's Handbook Manual

Automatic air conditioning

1
AUTO program, see further below
2 Ambient air/Automatic Air Recirculation
Control AUC/recirculated air
3 Defrosting windows and removing mist
4 Temperature, left-hand side of interior
compartment 99
5 Maximum cooling effect
6 Air volume 100
7 Temperature, right-hand side of interior
compartment 99
8 Residual heat utilisation
9 Heated rear window
Preferred interior climate
The AUTO program 1 establishes the optimum
air distribution and air volume for virtually all
conditions. Select the interior temperature you
find the most agreeable.
The following instructions inform you in detail
how to adjust the settings.
The settings are saved for the remote control
currently in use.
AUTO program
The AUTO program takes charge
of setting the air distribution to the
windscreen and side windows, to
the upper body and to the footwell, as well as
the air volume. It in addition adapts your tem-
perature requirements in the light of ambient
seasonal influences.
The cooling function is switched on automati-
cally in the AUTO program. A condensation
98
Online Edition for Part no. 01 41 0 013 197 - © 02/07 BMW AG
99
99
100
101
101
10 Switching cooling function on/off
manually 101
11 Switching off automatic air
conditioning 101
12 Air inlet grille for interior temperature sen-
sor, keep unobstructed
13 Independent ventilation control/auxiliary
heater 108
> Lit: switch-on time activated
> Flashing: independent ventilation
control/auxiliary heater switched on
The current setting for the air distribution is dis-
played on the control display, see page 100.
sensor simultaneously regulates the program in
such a way as to avoid or minimise condensa-
tion on the window surfaces.
Intensity of the AUTO program
By pressing the AUTO button repeatedly you
can set the intensity of the AUTO program. The
current setting will be displayed to you briefly in
the lower status line of the control display when
you press the button.
You can also adjust the intensity of the AUTO
program via iDrive.
iDrive, principle, see page 14.
1. Press the button to call up the start
menu.
2. Move the controller towards "Climate".
3. Turn the controller to select a field.