BMW 730i Owner's Handbook Manual page 139

3. Select "With map " and press the controller.
A map section is displayed on the control
display:
>
Around the current destination during
route guidance
> Around the last destination entered if
route guidance is switched off
4. Select the destination with the cross-hairs:
> Change the scale: turn the controller
> Move the map: move the controller in the
corresponding direction.
The name of the street or place at the inter-
section of the cross-hairs is displayed as
soon as the map is no longer being moved.
5. Press the controller to display more menu
items:
> "Next" switches back to "With map".
>
"Location" selects the current location
as map middle point.
> "Destin." selects the active or the last
destination as map middle point.
> "Save destination" transfers the address
in the cross-hairs in the destination
entry.
If the navigation system is unable to identify a
street or place, the location is displayed as
Online Edition for Part no. 01 41 0 013 197 - © 02/07 BMW AG
degrees longitude and latitude. A street or road
name near the selected destination will be dis-
played.
To be able to choose this point as destination or
save it in the address book as an address, you
must first enter a name, see page 134.
Selecting the destination via
information
You can call up selected destinations, e.g.
hotels, tourist attractions or hospitals, and
transfer them for route guidance if you choose.
"General destination" and "Travel info" are fun-
damentally the same, the only difference being
the greater range of possible destinations avail-
able under "Travel info".
General destination
1. Select "Dest. input" and press the control-
ler.
2. Select "New dest." and press the controller.
3. Select "Information" and press the control-
ler.
4. Select "General destination" and press the
controller.
137