BMW 730i Owner's Handbook Manual page 77

> Estimated time of arrival at destination and
remaining distance:
> Manually enter a distance into the com-
puter, see Entering distance manually
>
Enter a destination in the navigation sys-
tem, see page 133
> Range before refuelling
> Average fuel consumption
> Average speed
Resetting values
You can reset the values for average speed and
average consumption:
1. Select the respective menu item and press
the controller.
2. Press the controller again to confirm your
selection.
This also resets the displays on the info display.
An independent air conditioning system
influences the average consumption,
average speed and travelling time. As a result,
these values may rise.<
Entering distance manually
1. Select "To dest." and press the controller.
2. Turn the controller to set the distance to the
destination.
3. Press the controller to apply the setting.
The distance to the destination is automatically
determined during the guidance to the destina-
tion by the navigation system, see page 146.
Online Edition for Part no. 01 41 0 013 197 - © 02/07 BMW AG
Via the voice input system
{On-board computer}.
Journey computer
The journey computer is suitable e.g. for a holi-
day trip.
iDrive, principle, see page 14.
1. Press the button to call up the start
menu.
2. Move the controller towards "On-board
data".
3. Select "BC " and press the controller.
> Departure time
> Journey time
> Distance covered
> Average fuel consumption
> Average speed
Switching the journey computer on/off and
resetting all values:
Select "START / RESET" and press the con-
troller.
Stopping the journey computer:
Select "STOP" and press the controller.
75