BMW 730i Owner's Handbook Manual page 171

If you are currently in an area in which the
selected station cannot be received unin-
terrupted, interference and interruptions to
transmission may occur during reception, or
reception may fail altogether.<
To select the stations that can be received, see
Selecting a frequency band on page 170.
Sampling stations, Scan
The stations in the current list are automatically
sampled in succession.
1. Select "DAB" and press the controller.
2. Select the desired list and press the con-
troller:
> "Autostore list":
Stations that can be received in the cur-
rent ensemble.
> "Memorised stations":
All memorised stations.
> "Current stations":
All stations in the current ensemble,
then the stations of the next ensemble.
3. Select "TUNE" and press the controller.
4. Select "SCAN" and press the controller.
Online Edition for Part no. 01 41 0 013 197 - © 02/07 BMW AG
Scan starts.
To stop Scan:
Press the controller.
Scan is interrupted and the selected station is
retained.
Via buttons in the centre console
To sample the stations, press and hold down
the button for the corresponding direc-
tion.
To stop Scan, press the button again.
The station name is displayed in the lower sta-
tus line, see page 18.
Manual station selection
You can switch between all ensembles that can
be received. The selected ensemble and its
corresponding stations are displayed.
Via buttons in the centre console
Press button for the corresponding
direction.
The next station of the current ensemble is
called up.
Via iDrive
1. Select "DAB" and press the controller.
2. Select "TUNE" and press the controller.
169