The Flow Of Operations - NAC Image Technology MC-529 User Manual

2.1 The Flow of Operations

The three methods to operate the MEMRECAM GX-3 are as follows.

Operation using the remote control J-PAD3（OPTION）

Operation using the control software GXLink

Operation using external input/output signals
This user's manual describes operation using the remote control J-PAD3.
The flow of operations for basic recording, playback and storage is shown in Figure 2-1. Settings using
the J-PAD3 are described in Chapters 3, 4 and 5.
Refer to【GXLink User's Manual】for operations using the control software GXLink.
Preparations
Power on
Stop
(STOP Mode)
Live Image Display
(VIEW Mode)
Recording
(ARM/REC Mode)
Stop
(STOP Mode)
Playback
(PLAY Mode)
(page 2-13~21)
Stop
(STOP Mode)
Power off
(Memory Backup)
(page 2-3 )
(page 2-4~6)
(page 2-7)
(page 2-8)
(page 2-9~12)
Save to USB
compatible storage
media
(page 2-22~23)
(page 2-12)
Figure 2-1 The Flow of Operations
Recording Settings
(Setting of the recording method, memory
segment, synchronized signal, etc)
System Settings
(Setting of the date, superimposed Information
display, etc)
Recording Settings
(Setting of the recording speed, frame size,
shutter exposure time, etc)
Live Image Settings
(Adjustment of the live image quality)
Playback Image Settings
(Adjustment of the playback image quality)
Save Settings
(Setting of the save frame range, save method,
2-2
(page 3-17~39)
(page 5-5~18)
(page 3-5~16)
(page 3-47~59)
(page 3-47~59)
etc)
(page 4-3~5)
(00235)