Display/Hide The Superimposed Information By The Camera Mode; (Osd Mode); Trigger Clock Settings (Osd Time) - NAC Image Technology MC-529 User Manual

5.2.5 Display/hide the superimposed information by the camera mode

(OSD MODE)

You can set display/hide the superimposed information on the image (OSD: On Screen Display) by
camera mode.
1) While in the STOP mode, press MENU
TOP MENU.
2) Use the arrows
MENU and press SET
3) Use the arrows
MENU (Figure 5-7).
4) Use the arrows
superimposed information by the camera mode. (Figure 5-9).
8
ALWAYS
STOP

5.2.6 Trigger clock settings (OSD TIME)

At Trigger of superposition information, I can set it as an image at a trigger time display or the present
time display (only VIEW, ARM, and REC mode).
5) While in the STOP mode, press MENU
TOP MENU.
6) Use the arrows
MENU and press SET
7) Use the arrows
MENU (Figure 5-7).
8) Use the arrows
5-10).
TRIG
CRNT
The time of CRNT selection -- VIEW, ARM, and REC mode -- the present time -- table 示 -- the title of
OSD is displayed as Date Time at last time (usually Trigger).
When the image trigger function is being used, I am displayed as Image Trigger.
TRIG
to select "SYS MENU" from the TOP
to display the SYS MENU.
to select "OSD MODE" from the SYS
to select Display/do not display
Display information superimposed with all cameras mode
Display information superimposed only at the time of STOP mode
to select "SYS MENU" from the TOP
to display the SYS MENU.
to select "OSD TIME" from the SYS
to select trigger clock setting. (Figure
Display trigger time
In VIEW, ARM, and REC mode, I display the present time.
(In STOP, PLAY, and LOOP mode, I display trigger time)
Figure 5-11 Screen display
to display the
to display the
CRNT
5-8
Figure 5-9 OSD MODE
Figure 5-10 OSD TIME
Image trigger
(00233)