Functional Description - Bosch GCM 10 S Professional Original Instructions Manual

OBJ_BUCH-1126-002.book Page 33 Thursday, July 29, 2010 12:07 PM

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
Intended Use
The power tool is intended as a stationary ma-
chine for making straight lengthways and cross-
ways cuts in wood. Horizontal mitre angles of
–52° to +62° as well as vertical bevel angles of
0° to 45° are possible.
The machine is designed with sufficient capacity
for sawing hard and softwood as well as press
and particle board.
The power tool is not suitable for cutting alumin-
ium or other non-ferrous metals or alloys.
Product Features
The numbering of the components shown refers
to the representation of the power tool on the
graphic pages.
1 Dust bag
2 Knurled nut of the depth stop
3 Blade guard
4 Locking lever
5 On/Off switch
6 Handle
7 Saw blade
8 Retracting blade guard
9 Fence
10 Scale for mitre angle (horizontal)
11 Insert plate
12 Locking bracket
13 Locking knob for various mitre angles
(horizontal)
14 Lever for mitre angle adjustment
(horizontal)
15 Angle indicator (horizontal)
16 Detents for standard mitre angles
17 Saw table
18 Mounting holes
19 Allen screws of the saw table extension
Bosch Power Tools
20 Drill holes for extension bars
21 Saw-Table extension
22 Quick-action clamp
23 Stop screw for 45° bevel angle (vertical)
24 Stop screw for 0° bevel angle (vertical)
25 Slide device
26 Locking screw for slide device
27 Extraction adapter
28 Allen screws (6 mm) of the fence
29 Holes for quick-action clamp
30 Allen key (size 6 mm)/Phillips screwdriver
31 Adjustment knob for 33.9° bevel angle
32 Clamping lever for various bevel angles
(vertical)
33 Transport safety-lock
34 Adjusting screw of depth stop
35 Ring/open-end spanner
(ring: 13 mm; open-end: 12 mm)
36 Recessed grips
37 Sawdust ejector
38/39Phillips screw (attachment of retracting
blade guard)
40 Spindle lock
41 Hexagon bolt for saw-blade attachment
42 Washer
43 Clamping flange
44 Interior clamping flange
45 Extension bar*
46 Clamping lever of the quick-action clamp
47 Threaded rod
48 Angle indicator (vertical)
49 Screws for insert plate
50 Lock nuts of the depth stop
51 Depth stop
52 Length stop*
53 Screw for angle indicator (vertical)
54 Scale for bevel angle (vertical)
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
1 609 929 X03 | (29/7/10)
English | 33