Setup Flow - NEC EXPRESS5800 N8800-096F User Manual

SETUP FLOW

The following flow-chart illustrates
the flow of the setup procedures for
the NEC Express5800/320Fb-L(-R)
server and 320Fb-M(-R) server.
Corresponding page numbers are
shown in parentheses.
: Entered or selected by the
user
: Proceeds automatically
Step 1: Things Required for Setup
Step 2: Prepare for Express Setup
Step 3: Disable Boot Monitoring Function
Step 4: Start the Express Setup
Run [Setup] from NEC EXPRESSBUILDER top menu
Prepare for Windows Server 2003 R2 Enterprise Edition
installation and GeminiEngine Control Software installation
Insert Windows Server 2003 R2 Enterprise Edition CD-ROM in
the CD-ROM drive
Specify the size of the partition for OS installation
Copy OS module to hard disk
Automatic installation starts:
Select language for HotFix
Windows Server 2003 R2 Enterprise Edition
GeminiEngine Control Software
NEC ESMPRO Agent
Step 5: Set Dual LAN Configuration
Step 5: Set Dual LAN Configuration
Step 6: Set Dual Disk Configuration
Step 7: Update Software
Step 8: Connect and Configure Options
Step 9: Create Volume
Step 10: Set Network for NEC ESMPRO Agent
Step 11: Enable Boot Monitoring Function
Step 12: Make Settings for Failure Management
- Set memory dump (debug information)
- Set Dr. Watson
- Install a network monitor
- Set Recovery Console
Step 13: Back up System Information
Setup completed
Windows Setup 4-3
(P.4-4)
(P.4-6)
(P.4-9)
(P.4-14)
(P.4-21)
(P.4-23)
(P.4-29)
(P.4-32)
(P.4-32)
(P.4-33)
(P.4-33)
(P.4-35)
(P.4-36)
(P.4-44)