Note - NEC NX7700i/5080H-32 Operation Manual

Base Module
• Possible Events (including operator entries) and System Responses
Login account or password was wrong.
Login account or password rejected 3
times consecutively.
No operations made for 5 minutes on the
login account or password prompt screen.
A letter not specified in the menu was
entered.
No operation made for 5 minutes on the
Menu screen.
The menu became invalid after iSP
master assignment has been changed.
A value from 0 to 7 selected.
(valid only on the master iSP)
S selected.
(valid regardless of master/backup
assignment)
V selected.
(valid only on the master iSP)
E selected.
DISCONNECTALL selected.
The number of simultaneous connections
allowable for the selected mode was
exceeded.
2.4.2.

Note

While in serial or OS console connection, characters that are shown on the console screen may
be disturbed due to redirection made in a half way of ESC sequence.
855-900547-200
Event
2-24
System Response
The login prompt reappears after the message
"incorrect" comes on.
The console is disconnected.
The console is disconnected after the message
"timeout" appears.
The menu reopens.
The console is disconnected after the message
"timeout" appears.
The invalid menu or prompt is not identified
immediately.
If you make a selection in the invalid menu, that
selection is rejected and a new menu opens.
OS (BIOS) Serial Console Redirection is chosen.
SP Command Console is chosen.
Virtual SOP is chosen.
The current console connection is disconnected.
All TCP connections to the iSP other than the
current console connection are disconnected and
the screen is forcibly returned to the Main Menu
in case of serial connection console.
This emergency action might be needed if
console operation is prohibited when actually
disconnected TCP connections remain alive
under the iSP management due to client's illegal
access.
The screen returns to the Main Menu after
showing a message "N connections to the
selected mode are already established. Try it
later."