2.4.
Service Processor (SP)
This system contains interfaces to offer advanced system management and RAS function to the
user. The service processor (hereafter called the "SP") in the iSP implements these capabilities.
2.4.1.
Console Connection and Login
2.4.1.1.
Type of Console Connections
The iSP supports two types of console connections: i.e. local console connection via serial port
and LAN console connection via TCP port 5001.
Either type of connection provides completely identical user interface, except that all LAN
configuration such as IP address setting can only be done from the local console.
For the details of serial port and LAN configuration, refer to the "SG Command Reference."
iSP-card
Serial connector 0
LAN connector
2.4.1.2.
Accessible Console Functions
The console operator has access to the following console operations:
• iSP operation using SP commands
• Redirection of OS (BIOS) serial (inside the CPU) console
• Virtual SOP display
null modem cable
TCP5001
Figure 2-17 Type of Console Connections
local
console
2-19
Base Module
LAN
console
855-900547-200