Table of Contents
Advertisement
Base Module
Figure 2-12 Preventing Accidental Erasure of Data on DAT (Write Protect)
2.2.11.4. Cleaning the DAT Unit
Wipe off the dusts on the DAT unit. See 2.2.11.5 to 2.2.11.7 for how to clean the DAT unit.
2.2.11.5. Cleaning Schedule
How often the DAT unit should be cleaned depends on the operating environment. The table
below will be of some help.
Frequency of using data cartridge
Use of one cartridge per day
Use of 2 to 3 cartridges per day
Use of more than 3 cartridges per day
Cleaning is important to remove accumulated dust on the magnetic head caused by running
tapes and surrounding environment. Periodic cleaning is recommended.
2.2.11.6. Cleaning Medium for the DAT Unit
The cleaning cartridge can be used approximately 50 times.
Clean the drive head with this cartridge before using the new data cartridge. It is recommended
to clean the head prior to writing or reading the DAT. Clean the head once a month even though
the DAT unit is not used.
855-900547-200
Cleaning schedule
Once a week
Twice a week
Everyday
2-12
Advertisement
Table of Contents
