Operation Environment; Preparation Before Setup; Snmp Service Setting - NEC Express 320Lc User Manual

Operation Environment

NEC ESMPRO Agent can be operated in the hardware and software environments shown below.
Hardware
Installation system
•
Memory
•
Empty capacity of hard
•
disk
Software Windows Server 2003, Windows 2000

Preparation before Setup

Be sure to read the following description before system installation or setup.
To operate NEC ESMPRO Agent, you need to make settings of TCP/IP and the SNMP of
components associated with TCP/IP.
TCP/IP Setting
See the Help started from the Start menu for how to set TCP/IP.

SNMP Service Setting

To install the SNMP Service:
1. Open [Add/Remove Programs] in [Control Panel].
2. Click [Add/Remove Windows Components].
3. Select [Management and Monitoring Tools] in the Windows component wizard and click
the [Details...] button.
4. Check the check box of [Simple Network Management Protocol].
5. Click the [Next] button.
The file copy operation is started.
6. After the file copy is finished, click the [Finish] button.
To change the settings of the SNMP Service:
1. Double-click [Administrative Tool] in [Control Panel].
2. Start [Services] in [Administrative Tool].
3. Select [SNMP Service] from the service list and then [Properties] in the [Action] menu.
The "SNMP Properties" dialog box appears.
Procedures after Completion of Installation 5-3
NEC Express5800/ft series
Memory capacity required to operate OS +
25.0 MB or larger
50.0 MB or larger