Image Settings - Abus TVIP62000 User Manual

5.3 Image Settings

Brightness:
Saturation:
Contrast:
Sharpness:
Exposure:
White Balance:
R-gain:
B-gain:
Night Mode:
AGC:
Rotation:
IR Light Intensity:
Level:
Brightness of the video image.
Saturation of the video image.
Contrast of the video image.
Sets the sharpness of the video image. A higher sharpness value increases the noise
in the video image.
Auto: The exposure time is set automatically, regardless of the network frequency.
Auto 50 Hz: The exposure time is set automatically. The basic parameters are
optimised for a 50 Hz network frequency.
Auto 60 Hz: The exposure time is set automatically. The basic parameters are
optimised for a 60 Hz network frequency.
Manual 50 Hz: The exposure time can be set manually. The basic parameters are
optimised for a 50 Hz network frequency.
Manual 60 Hz: The exposure time can be set manually. The basic parameters are
optimised for a 60 Hz network frequency.
Auto: The white balance is set automatically (range: 2,000– 9,500 K).
Red value setting for manual white balance.
Blue value setting for manual white balance.
Auto: The camera switches automatically into night mode (below ~3 lux).
On: The camera is set to night mode. The IR swivel filter is separated from the image sensor.
Off: The camera is set to day mode. The IR swivel filter is positioned in front of the
image sensor.
Manual setting of the maximum gain value on the image sensor.
Flip: Vertical mirroring of video image.
Mirror: Horizontal mirroring of video image.
Auto: The IR intensity is regulated automatically by the camera depending on the
ambient lighting conditions.
Fixed: Defines the IR intensity value.
The IR intensity can be set on 10 levels. To deactivate the IR LEDs, set this value
to 0 – the function of the IR swivel filter (ICR) for day/night switching remains in place
(e.g. use of an external IR illuminator).
66