Camera Settings - Abus TVAC15000 User Manual

6.3 Camera settings

Camera on/off = show/hide camera
Camera Brightness = brightness of camera
Event list:
The recordings are stored in sub-folders named after the
recording date.
The recordings are stored as individual files with the time of
recording as the file name.
System setup:
Quad Display = four-way display
Scan Period = dwell time for sequence display
Time setting = Date/time settings
SD Card Format = format SD card
Power Saving = energy-saving mode
TV-Format = TV output resolution
Set to factory Default = reset to factory defaults
System Version = software version of the monitor and
camera
Use the ◄► buttons to select a camera. Press
OK to switch between ON and OFF.
If you switch the camera OFF, it is no longer
shown.
Use the ◄► buttons to select the desired
camera and confirm your choice with OK.
The relevant camera image is shown with a
selection bar with the options 0–9. You can use
the ◄► buttons to change the setting and
confirm with OK.
34
English