Accessing The Network Camera Over Abus Vms; Accessing The Network Camera Over Abus Nvr; Accessing The Network Camera Over Abus Nas - Abus TVIP62000 User Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

3.14 Accessing the network camera over ABUS VMS

The free Eytron VMS Express recording software can be found on the supplied CD-ROM. You then have the
possibility of connecting and recording several ABUS Security-Center network cameras on one interface.
Further information can be found in the software manual on the enclosed CD-ROM.
When integrating the TVIP62000 camera in ABUS VMS or HDVR, the video setting should be set to the
H.264 configuration type (note: the factory-set standard on TVIP62000 is MPEG-4).

3.15 Accessing the network camera over ABUS NVR

Notes:
1) Please read the corresponding NVR device manual for information on the standard connection of network
cameras in ABUS network video recorders (NVR).
2) To integrate the TVIP62000 camera in NVR devices, the video setting must be set to the MPEG-4
configuration type (factory-set standard on TVIP62000).
The resolution and quality of the second RTSP stream (low bandwidth) used for the split screen
view cannot be changed (standard: 320 x 240 pixels, variable bit rate 64 to 450 kBit/s).

3.16 Accessing the network camera over ABUS NAS

Notes:
1) Please read the corresponding NAS device manual for information on the standard connection of network
cameras in ABUS network attached storage systems (NAS).
When integrating the TVIP62000 camera in NAS devices, the video setting should be set to the H.264
configuration type (note: the factory-set standard on TVIP62000 is MPEG-4).
The second RTSP stream (low bandwidth) is used when certain settings are made
in the browser view. The resolution and quality of this stream cannot be changed
(standard: 320 x 240 pixels, variable bit rate 64 to 450 kBit/s).
56

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents