Image - Abus TVIP11561 User Manual

11.1.1. Image

Scheduled Image Settings:
Brightness, contrast:
Saturation, hue:
Sharpness:
Iris mode:
Exposure time:
Day/night switching:
Delay time:
Smart IR:
BLC:
WDR:
Wide dynamic level:
White balance:
Digital Noise reduction:
Noise reduction level:
Mirroring:
Video standard:
Configure whether you wish to set a common profile for day and night
mode, use an automatic separate day and night profile or a time-
controlled separate day and night profile.
Adjust these values to suit the ambient conditions.
Adjust these values to suit the ambient conditions.
set the electronic oversharpening for the image (edge overdraw)
choose between manual and automatic iris control, depending on your
model. If only one mode is available, then it is the only mode offered.
select a value for the fixed exposure time.
Select a method for switching between day and night mode.
Day: The camera stays in day mode.
Night: the camera stays in night mode.
Auto: Automatic switching according to light conditions
Schedule: switching at fixed times. You must enter the day start time
and day end time.
Triggered by event: switching is performed by triggering the switching
input. The output status can be achieved via the status option if the
input is not triggered.
delay in seconds until switching to day or night mode.
Prevents glare effects from objects that are too close when IR lighting
is enabled.
backlight compensation with reference to a selected area
wide dynamic function for improved display of high contrasts. The
WDR level should be reduced if the image displayed is too bright.
select the WDR level. A higher level may increase image noise.
Select between different variants of white balance.
Function for reducing noise in the image. The higher the value, the
more noise is removed and the more static the image appears.
select the DNR level
this setting can be used to mirror the image horizontally or horizontally
and vertically.
Here you can set the mains frequency of the power supply network.
26
English