Description Of The Status Leds; Description Of The Reset Button Function - Abus TVIP62000 User Manual

3.5 Description of the status LEDs

State
Off
On
Max. 3 x flash

3.6 Description of the reset button function

Restoring the factory settings
a) Remove the power supply unit from the camera.
b) Press the reset button.
c) Reattach the power supply unit whilst holding down the reset button, then keep it held down
for 10 seconds.
Restarting
a) The camera is restarted if the reset button is pressed once briefly.
Description
IP address assignment
IP address assignment successful
Communication to IR LED PCB/
light sensor established
50