Avalue Technology EPS-AT270 Quick Reference Manual page 8

EPS-AT270
2.2 Installing Hard Disk & Memory
Step 1. Unfasten 2 screws from bottom and rear side.
Step 2. Remove the chassis cover.
Step 3. Removing 4 fixing screws of bottom.
Step 4. Insert DDR2 SODIMM into memory socket.
Step 5. Insert the drive into position, and secure it with 4 screws.
Step 6. Place back the cover and fasten 2 screws back as the original.
8 EPS-AT270 Quick Reference Guide