Checking The Pull Lever Shaft And Pull Rod; Installing The Clutch - Yamaha YZF-R1V Supplementary Service Manual

CLUTCH
EAS00287
CHECKING THE PULL LEVER SHAFT AND
PULL ROD
(YZF-R1LE)
1. Check:
• pull lever shaft pinion gear teeth
• pull rod teeth
Damage/wear → Replace the pull rod and
pull lever shaft pinion gear as a set.
2. Check:
• pull rod bearing
Damage/wear → Replace.

INSTALLING THE CLUTCH

(YZF-R1LE)
1. Install:
• clutch housing
• conical spring washer
• thrust plate 2
NOTE: NOTE:
Align the projection of clutch housing
hollow of the oil pump drive gear
2. Install:
• pressure plate 2
• clutch boss
NOTE: NOTE:
Fit the groove of the pressure plate 2 to the
projection of the clutch boss to assemble.
71
ENG
and
.