Yamaha YZF-R1V Supplementary Service Manual page 38

ADJUSTING THE FRONT FORK LEGS
30
NOTE: NOTE:
To find the standard position, turn the adjusting
bolt in direction until it stop.
1. If the alignment mark on the adjusting bolt
is positioned past the alignment mark on
the front fork cap, turn the adjusting bolt in
direction until the alignment marks
match.
Turn the adjusting bolt 3 complete turns in
direction , and be sure the alignment
mark match.
This is the standard position.
2. If the alignment mark on the adjusting bolt
is positioned before the alignment mark on
the front fork cap, turn the adjusting bolt in
direction until the alignment marks
match.
Turn the adjusting bolt 2 complete turns in
direction , and be sure the alignment
mark match.
This is the standard position.
Rebound damping
CAUTION:
Never go beyond the maximum or minimum
adjustment positions.
1. Adjust:
• rebound damping
a. Turn the adjusting screw
or .
Rebound damping is
Direction increased (suspension is
harder).
Rebound damping is
Direction decreased (suspension
is softer).
Adjusting positions
Minimum: 17 clicks in direction
Standard: 12 clicks in direction
Maximum: 1 clicks in direction
* with the adjusting screw fully turned-in
direction
CHK
ADJ
in direction
*
*
*