General Information; Special Tools - Yamaha YZF-R1V Supplementary Service Manual

EAS00027

SPECIAL TOOLS

The following special tools are necessary for complete and accurate tune-up and assembly. Use
only the appropriate special tools as this will help prevent damage caused by the use of inappropri-
ate tools or improvised techniques. Special tools, part numbers or both may differ depending on the
country.
When placing an order, refer to the list provided below to avoid any mistakes.
NOTE:
• For U.S.A. and Canada, use part number starting with "YM-", "YU-", or "ACC-".
• For others, use part number starting with "90890-".
(YZF-R1LE)
Tool No.
Front fork cap bolt wrench
90890-01472
This tool is used to loosen or tighten the front
fork cap bolt.
Damper rod holder
90890-01504
This tool is used to loosening or tightening
the damper rod assembly.
Rod puller Rod puller
90890-01437
Rod puller attachment
YM-A8703
Rod puller
attachment
These tools are used to pull up the front fork
90890-01435
damper rod.
YM-A8703

GENERAL INFORMATION

Tool name/Function
1
SPECIAL TOOLS
Illustration
GEN
INFO