Checking The Clutch Springs; Checking The Clutch Housing - Yamaha YZF-R1V Supplementary Service Manual

CLUTCH
NOTE: NOTE:
When adjusting the clutch assembly width [by
replacing the clutch plate(s)], be sure to
replace the clutch plate
After replacing the clutch plate
tions cannot be met, replace the clutch plate
.
EAS00282

CHECKING THE CLUTCH SPRINGS

(YZF-R1LE)
The following procedure applies to all of the
clutch springs.
1. Check:
• clutch spring
Damage → Replace the clutch springs as a
set.
2. Measure:
• clutch spring free length
Out of specification → Replace the clutch
springs as a set.
Clutch spring free length
43.8 mm (1.72 in)
<Limit>: 41.6 mm (1.64 in)
EAS00284

CHECKING THE CLUTCH HOUSING

(YZF-R1LE)
1. Check:
• clutch housing dogs
Damage/pitting/wear → Deburr the clutch
housing dogs or replace the clutch housing.
NOTE: NOTE:
Pitting on the clutch housing dogs will cause
erratic clutch operation.
2. Check:
• bearing
Damage/wear → Replace the bearing and
clutch housing.
69
ENG
fast.
, if specifica-