Table of Contents
Advertisement
Chapter 4
- Locate the CAMERA control.
- Locate the ENTER key on the Wireless remote
controller.
4.4 Setting Up your
ISDN Line
Information
Introduction:
When ordering BRI service, you will usually get
2 My numbers and 2 SPID numbers per BRI.
A SPID normally consists of the user's 3 digit
area code, 7 digit ISDN telephone number,
followed by a 0101. Ex:
Note: The VisuaLink 128 requires 2 My numbers
Page 4-24
Remote Controller Directions:
Gives some general directions for configure the VisuaLink system. Using the
Remote controller highlight the NEXT option to advance to the configure screen
or press the lower portion of the CAMERA CONTROL key to highlight the
Configure Later to advance to the normal ICON screens. If you choose to
configure later, the system will have to be programmed with My numbers and
SPID's in order to work correctly.
Part 1- Remote Controller Location
The CAMERA control key is the BLUE round
key. Use this key to move the Cursor
up/down and Left/Right in the Configuration
Screens.
Use the ENTER key to confirm selections
and store information.
Next screen
Prior screen
The following is a description of BRI Line setup
Part 2- Setting up Your ISDN Line
MY Number 1: 9727195854
SPID 1:
97271958540101
and 2 SPID #, while the VisuaLink 384
requires 6 My numbers and 6 SPID #.
Next screen
Prior screen
VisuaLink 128/384 User Guide
Note is yellow.
NDA-24230 Issue 2.0
Advertisement
Table of Contents
