Table of Contents
Advertisement
VisuaLink 128/384 User Guide
Chapter 8 Operation Method
POWER
8.1 System Status
STATUS
NDA-24230 Issue 2.0
This chapter explains how to perform basic remote control functions of the
VisuaLink 128 or VisuaLink 384, such as switching monitor screens, and
controlling cameras. Your system is ON if the light near the power display on the
front of the VisuaLink unit is lit.
Power Switch
If the VisuaLink is not ON, press the POWER SWITCH on the front of the
VisuaLink unit.
The STATUS button on the hand held remote provides information that you might
want to know during your videoconference. It displays call status, which camera
is currently sending the image and the time.
8.1.1 Check the system status
Press STATUS button.
The status information appears at the top and bottom of the screen.
Irving
Local control:
LINE
POWER
B1 B2-B6
Power LED
Camera 1
Chapter 8
HEADSET
12:00
Page 8-1
Advertisement
Table of Contents
