Chapter 1 Introducing Your Visualink; Applying For Isdn Bri - NEC VisuaLink 128/384 User Manual

Nec visualink 128/384 user guide
Table of Contents

Advertisement

VisuaLink 128/384 User Guide

Chapter 1 Introducing Your VisuaLink

1.1 Applying for ISDN
BRI
NDA-24230 Issue 2.0
This device cannot be used unless a connection to ISDN BRI Communication
Line is provided. Verify that a ISDN line exists before the CODEC is installed.
What to watch out for when filling out an ISDN BRI application:
As defined by Bellcore; the ISDN BRI simplified ordering code is EZ-ISDN1.
• The ISDN BRI protocol national ISDN-1.
• The ISDN BRI service must be tariffed and available from the customer's
local central office.
• The D-Channel should not permit X.25 packet data.
• The ISDN BRI service must allow videoconferencing calls to be dialed on
either B-Channel or on both simultaneously.
• Both B-Channel must carry circuit switched videoconferencing data.
• The ISDN BRI line required one or two different SPID numbers.
• The ISDN BRI service must be automatic Terminal Endpoint Identifiers
(TEIs).
Voice and data features:
• Flexible calling
• Call forwarding variable
• Additional call offering
• Call number identification
• Redirecting number delivery
A How to Order ISDN BRI Guide has been prepared. This guide should be read
thoroughly and forwarded to your Teleco provider. This document is located in
the
Appendix
D.
Chapter 1
Page 1-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Visualink 128Visualink 384

Table of Contents