NEC VisuaLink 128/384 User Manual page 36

Chapter 4
No. Name
1 VisuaLink 128 or VisuaLink 384
2 Microphone
3 Stand-type Camera
4 PC (Provided by customer)
5 Video Capture Card
6 Director Software
Page 4-8
Connect the VisuaLink AC Power.
Using the provided AC transformer power cable, plug the power cable into
the VisuaLink connection marked DC-IN-5V. Plug the other end into the AC
POWER STRIP.
4.2.3 Desktop Configuration
Step-by-step procedures for installating the VisuaLink system in a desktop
application.
Equipment to Connect
Parts List
CODEC Engine.
Generic Microphone to allow for the transmission of
audio.
Generic camera to allow for the transmission of video.
Your personal PC with a monitor. PC should have
audio input capability.
Allows for the input of a video image into a PC.
Allows for VisuaLink control via PC. Software may be
downloaded from Web site:
http://www.cng.nec.com/html/products.htm
1. Click on the NTAC icon
SUPPORT from the menu bar at the top of the
screen.
2. At the CNG SUPPORT screen, click on the
Online
3. At the National Technical Assistance Center
screen, click on the Downloads
icon
menu bar.
4. At the Downloads screen, click on the Arrow icon
you come to
5. Click on the
Director for VL128/VL384
in
Note: If you have a problem with this procedure,
Note
text.
or the Downloads text on the
at the top or bottom of the screen until
Video-VL128/384.
, then click of the
blue.
please call the NTAC support line at 1-800-852-
4632.
VisuaLink 128/384 User Guide
or select
NTAC
VisuaLink
text that is highlighted
NDA-24230 Issue 2.0