Chapter 4
Page 4-30
Powering Up Screen
America, Inc.
VisuaLink
Powering Up
Ver .22.02.37
Changing the configuration
It is important that the CODEC is set up with a local number and SPID numbers.
If the unit is not setup with a local number (my number) and SPID, the unit will
not allow for dialing and receiving of video calls. If you have entered these
numbers in the Start Up configuration, you may ignore this section. If the
VisuaLink environment has changed, such as the phone number have changed,
you must reconfigures the numbers in the VisuaLink.
VisuaLink 128/384 User Guide
NDA-24230 Issue 2.0