Table of Contents
Advertisement
Inserting a PC Card
Follow these steps to insert a PC card in your system.
inserting a PC card you may have to disable either the IR port, USB port, or the 56K
internal modem. Check the Windows device manager to ensure that one of these
devices is disabled before inserting a PC card.
For information about enabling and disabling devices on your NEC Versa VXi, see
"Enabling and Disabling Devices," later in this chapter.
1.
Align the card so that the 68-pin connector points towards the slot and the arrow on
the PC card faces up.
2.
Slide the card into either slot. A low tone followed by a high tone lets you know
that the card is fully inserted and recognized. (If you turn off the sound, no sound
is emitted.)
indicate that the card is inserted, but the card type is unknown.
You can use the PC card software preinstalled on your system to check PC card
3.
slot availability. For example, look for the PC Card icon in the Windows Control
panel. It shows which slot contains a PC card and which is empty.
6-6 Communicating with Your NEC Versa
Some PC cards require additional system resources. Before
Other two-tone sequences such as high, then low tones
Inserting a PC card
Advertisement
Table of Contents
