Using The Ac Adapter - NEC VXi User Manual

Using the AC Adapter

Use the AC adapter and power cable that came with your NEC Versa VXi to run your
computer on alternating current (AC) power, or to recharge the battery pack. Use the
AC adapter whenever a wall outlet is nearby.
When connected, the AC adapter charges the battery whether or not the NEC Versa
VXi is powered on.
adapter has no user-replaceable or serviceable parts inside. Dangerous voltage in the
AC adapter can cause serious personal injury or death. The AC adapter is intended for
use with a computer. Both must meet EN60950 standards.
Note
the cord and plug are appropriate for your AC source.
Connect the AC adapter as follows:
system. Although other AC adapters may look similar, using them can damage the
system.
Connect the AC adapter cable to the power port on the back of your NEC Versa
1.
VXi system.
2-4 Getting Started
Do not attempt to disassemble the AC adapter. The AC
The AC outlet voltage should be in the range of 100–240 Volts AC. Verify that
Use only the AC adapter that comes with your NEC Versa VXi