How To Test The Bells And Sirens - C&K systems Sierra User Manual

How to Test the Bells and Sirens

You can test your system's
bells and sirens by following the
procedure to the right.
6
44
To Test the Bells and Sirens:
1. Press and hold the
[walk test] key for 2 seconds
until you hear two beeps.
Enter the master user code.
2. Press the
until you see the following
pattern of lit zone LEDs:
1 2 3 4 5 6
3. Press the
system's bells or sirens ring
for 4 seconds.
4. To exit, press the
key.
key twice
7 8
key. Your