Optional Arming Features - C&K systems Sierra User Manual

Optional Arming Features

Your system offers several optional arming features, described
below. Refer to Section 8 to see which features are installed on
your system.
3
Extended Exit Delay. This feature automatically resets the exit
delay if you re-enter the building while the system is being armed.
You may re-enter up to four times; each time, the exit delay is
reset to its full value.
Keypad Lockout. Designed to prevent an intruder from guess-
ing a user code, this option causes the system to slow down if a
series of invalid user codes are entered. Before a new code can
be entered, the user must wait through a delay. The delay length-
ens as more invalid codes are entered. Depending upon your
system's programming, the keypad lockout may not affect arm-
ing.
Keyswitch Arming. This accessory (Sierra S5051 or equiva-
lent) allows you to arm and/or disarm the system with a key. Fol-
low the instructions provided with the switch.
Quick Exit. This option allows you to exit a home-armed build-
ing without disarming and re-arming. To start the exit delay, press
and hold the [quick exit] key for 2 seconds until you hear
two beeps. Then, enter your user code, and exit. (Depending
upon your system's programming, you may not need to enter your
user code.)
Exit Termination. This option allows you to shorten the exit de-
lay to the last five seconds by pressing a button connected to
your keypad.
26