Temporary Maid Code - C&K systems Sierra User Manual

Temporary
Maid Code
As the preceding section
shows, the Maid Code can be
programmed to work on certain
days of the week only. If you
prefer, however, you can set
the Maid Code to work for the
next few hours, regardless of
the day of the week. The num-
ber of hours the Maid Code
works depends upon your
system's programming.
The Temporary Maid Code, like
the Maid Code, is assigned to
user number 13.
See Section 8 for the specifics
of how your system was pro-
grammed.
Standard Code ___
Optional Code _X_
Active Certain Days/Times _X_
To Start the
Maid Code Timer:
1. Press and hold the
[maid] key for 2 seconds un-
til you hear two beeps. All
of the zone LEDs blink.
2. Enter the master user code.
3. Press the
the Zone 8 LED lights.
4. To exit, press the
key. The Maid Code will
now work for the next few
hours.
2
key until
15