Automatic (Timed) Arming - C&K systems Sierra User Manual

Your system can automatically
3
arm itself at preset times of the
day.
At two minutes and again at one
minute before the Automatic
Arming sequence begins, the
siren sounds. Then, the exit de-
lay begins. You must leave the
building during the exit delay, or
an alarm sounds.
You can postpone the Auto-
matic Arming sequence by one
hour. When the siren sounds
two minutes before arming oc-
curs, press the
then enter your user code.
You can change the days that
Automatic Arming occurs by
following the procedure to the
right. To stop Automatic Arm-
ing, turn off all of the Automatic
Arming days. To change the
times that arming occurs, con-
tact your installer.
22
Automatic (Timed)
Arming
To Change Automatic
1. Press and hold the
[walk test] key for 2 seconds
until you hear two beeps.
Enter the master user code.
2. Press the
times until you see the fol-
lowing:
3. Press the
key, zone LEDs light to indicate
the days when Automatic
Arming occurs. The zone 1
LED represents Sunday, etc.
A lit LED means arming oc-
curs on that day.
4. Press the number of the
day(s) you wish to switch on
or off. To exit, press the
Interior armed _X_
Perimeter armed _X_
Exit allowed _X_
Requires user code ___
Automatically arms _X_
No entry allowed ___
Arming Days:
key six
1 2 3 4 5 6 7 8
key. The
key.