How To Use Event Memory - C&K systems Sierra User Manual

How to Use Event Memory

Your system records important
events, such as alarms, in
Event Memory. You can review
Event Memory to monitor the
status of your system. As many
as 500 events may be re-
corded, depending upon your
system's configuration.
Within Event Memory, your
keypad's zone LEDs light in
patterns to identify different
events. The table on the next
pages shows the various pat-
terns the keypad uses.
To Review Event Memory:
1. Press and hold the
[walk test] key for 2 seconds
until you hear two beeps.
Enter the master user code.
2. Press the
you see the following pattern
of lit zone LEDs:
1 2 3 4 5 6
3. Press the
4. To view the oldest events
first, press
the latest events first, press
. The keypad beeps
twice. For the next 15 sec-
onds, the zone LEDs display
the earliest or latest event.
5. Press
next event, or
view the previous event.
6. To exit, press the
key .
key until
7 8
6
key.
. To view
to view the
to
41