Canceling An Alarm; After An Alarm - C&K systems Sierra User Manual

Canceling an Alarm

If programmed, your system
pauses briefly before sounding
an alarm. This gives you the
opportunity to cancel a false
alarm. You can cancel the
alarms of any sensor, including
a smoke detector.
4
The amount of time you have
to cancel the alarm depends
upon how your installer pro-
grammed the system. See the
"Cancel Alarm Time" listing in
Section 8. Your keypad may
beep to warn you that an alarm
is about to occur.
Five seconds after an alarm is
canceled, your system reverts
to normal.

After an Alarm

You should reset your system
after an alarm. This action
clears your keypad's display
and resets your sensors.
30
To Cancel an Alarm:
1. The Arm LED blinks and
your system's sirens may
sound. Press the
and enter your user code.
The Zone LED blinks to in-
dicate an alarm occurred. To
clear the display, follow the
instructions below.
To Reset After an Alarm:
1. Press and hold the
key for 2 seconds until you
hear two beeps.
key