How to Test the Bells and Sirens
You can test your system's
bells and sirens by following
the procedure to the right. (See
Note 2 on page 62.)
6
Technical Manuals Online! - http://www.tech-man.com
44
To Test the Bells and Sirens:
1.
Press and hold the
[walk test] key for 2 seconds
until you hear two beeps.
Enter the master user code.
2.
Press the
until you see the following
pattern of lit zone LEDs:
3.
Press the
system's bells or sirens ring
for 4 seconds.
4.
To exit, press the
key.
key twice
key. Your