Maid Code - C&K systems Sierra User Manual

2
Unlike other user codes, which
work any day of the week, the
Maid Code works only on certain
days of the week.
The Maid Code is a four-digit user
code that you can change or de-
lete like any other user code.
Your installer must have pro-
grammed your system to accept
a Maid Code. For systems with-
out multiple areas (as described
in Section 7), the code is as-
signed to user number 13. It al-
lows an individual to arm and dis-
arm the system on specific days.
How it works. Arriving at the
building during a day when the
Maid Code is active, the maid can
disarm the system by entering the
Maid Code. Upon leaving the
building, the maid can arm the
system by entering the same
code.
For the specifics of how the Maid
Code was set up on your system,
see Section 8.
14
Maid
Code
Standard Code ___
Optional Code _X_
Active Certain Days/Times _X_
To Change Maid Days:
1. Press and hold the
[maid] key for 2 seconds un-
til you hear two beeps. All
of the zone LEDs blink.
2. Enter the master user code.
The zone LEDs of your key-
pad light to show which days
of the week the Maid Code
is active. The zone 1 LED
stands for Sunday; zone 2, for
Monday, and so on. If the
LED is lit, the code works
that day.
3. Press the corresponding num-
ber of the day(s) you wish to
switch on or off. The appro-
priate LED turns on or off, to
reflect the change.
4. To exit, press the
key.