Viessmann Vitodens 333 Service Instructions Manual page 46

Coding
Code 2
(cont.)
Coding in the delivered condition
Domestic hot water
56:0 Set DHW temperature
adjustable from 10 to
60 °C
58:0 Without auxiliary func-
tion for DHW heating
63:0 No default interval for
auxiliary function for
DHW heating (only for
constant temperature
control units)
65:... Information regarding
the type of diverter
valve; do not adjust.
67:40 With the Vitosolic:
third set DHW tempera-
ture 40 °C
6C:100 Set speed of the inter-
nal cylinder primary
pump 100 %
6F:... Maximum output for
DHW heating in %; de-
faulted by the boiler
coding card
46
Possible change
56:1 Set DHW temperature
adjustable from 10 to
above 60 °C
Note
Maximum value subject
to boiler coding card
Observe the max. per-
missible DHW tempera-
ture
58:10 Input of a second set
to DHW value, adjustable
58:60 from 10 to 60 °C (observe
the coding addresses
"56" and "63")
63:1 Auxiliary function for
DHW heating, 1 x daily
63:2 Every 2 days to every 14
to days
63:14
63:15 2 x daily
65:0 Without diverter valve
65:1 Viessmann diverter valve
65:2 Wilo diverter valve
65:3 Grunfos diverter valve
67:0 Without third set DHW
temperature
67:1 Third set DHW tempera-
to ture adjustable from 1 to
67:60 60 °C (subject to the set-
ting of coding address
"56")
6C:0 Set speed adjustable
to from 0 to 100 %
6C:100
6F:0 Max. output during DHW
to heating adjustable from
6F:100 min. output to 100 %