Sound Control; Other Functions; Tv, Component, Video And S-Video Modes; Auto Sleep - NEC NLT-20 Owner's Manual

Sound Control

You can select your preferred sound setting; Flat, Music,
Movie or Speech and you can also adjust the sound
frequency of equalizer, balance. If you switch AVL to on,
the set automatically keeps on an equal volume level even
if you change programmes.
1. Press the MENU button.
2. Select the Sound menu.
Then press the VOLÏq button.
3. Press the PRxy button to select the desired
sound item; Equalizer, Balance, AVL or Surround.
4. Press the VOLÏq button to make desired
adjustment.
Equalizer
Flat
Music
Movie
Speech
User
5. At Equalizer selection, press the PRxy button to
select your preferred setting ; Flat, Music, Movie,
Speech or User.
To set the Equalizer User.
a. Select User by pressing the PRxy button.
b. Select a sound band by pressing the VOLÏq button.
c. Make appropriate sound level with the PRxy button.
d. Press the MENU button to return to preceding menu
and the TV/AV button to return to normal TV viewing.
6. Select the Balance menu and adjust the balance of
speakers.
7. Select the AVL(Automatic Volume Leveler) menu On or Off.
8. Select the Surround menu On or Off.
Auto Sound Control
* The sound Flat, Music, Movie and Speech are programmed for optimum
reproduction at the factory and cannot be changed.
SSM (Sound Status Memory)
1. Press the SSM button.
2. Press the SSM button repeatedly to select.
Each press of the button changes the screen display as below.
Flat Music Movie Speech User
16
Sound
Equalizer
Balance 0
AVL Off
Surround Off
POWER
1 2 3
4 5 6
7 8 9
0
* *
PSM SSM
I/II
MENU TV/AV
PR
VOL VOL
OK
TV/PC
SLEEP
PR
TEXT/MIX Q.VIEW LIST
UPDATE TIME REVEAL HOLD
NS-201

Other functions

TV, COMPONENT, VIDEO and S-VIDEO modes

(You can't set PC mode in this menu. Use the TV/AV or
TV/PC mode.)
External equipment inputs: VIDEO or S-VIDEO mode are
used for video devices like VCRs, DVDs, etc.),
COMPONENT, is used for component type devices.
Note : If a VCR is connected to the antenna jack, use TV
mode. See External Equipment Connection section.
1. Press the MENU button.
2. Select the Special menu.
3. Press the PRxy button to select Input.
4. Press the VOLÏq button to select TV, COMPONENT,
VIDEO and S-VIDEO.
COMPONENT : Device connected to the COMPONENT
INPUT.
VIDEO : VIDEO device connected to the TV's VIDEO Input.
S-VIDEO : S-VIDEO device connected to the TV's S-
VIDEO Input.
To return to TV mode, press the TV/AV buttons repeatedly.
Alternatively you can select the TV, COMPONENT, VIDEO,
S-VIDEO or PC mode by pressing the TV/AV button.

Auto sleep

If you select Auto sleep On the set will automatically
switch itself to standby mode approximately ten minutes
after a TV Channel stops broadcasting.
1. Repeatedly press the MENU button to select the
Special menu.
2. Press the PRxy button to select Auto sleep.
3. Press the VOLÏq button to select On.
4. Press the TV/AV button to return to normal TV
viewing.

Blue back

Programme without a program signal appear in blue.
Special
Input TV
Auto Sleep Off
Blue back Off
POWER
1 2 3
4 5 6
7 8 9
* 0
*
PSM SSM I/II
MENU TV/AV
PR
VOL VOL
OK
SLEEP TV/PC
PR
TEXT/MIX Q.VIEW LIST
UPDATE TIME REVEAL HOLD
NS-201
17