NEC NLT-17WF Owner's Manual
NEC NLT-17WF Owner's Manual

NEC NLT-17WF Owner's Manual

17.1" wide tft lcd tv/monitor

Advertisement

NLT-17WF
Model:
Owner's Manual
Warnings
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING :
To reduce the risk of electric shock do not remove cover (or back).
No user serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the appliance.
WARNING :
To prevent fire or shock hazard, do not expose the set to rain or moisture. Do not rub
or strike the Active Matrix LCD with anything hard as this may scratch, mar, or
damage the Active Matrix LCD permanently.
The appliance is not intended for use by young children or infirm persons without
supervision.
Young children should be supervised to ensure that they do not play with the
appliance.
CAUTION:
Do not attempt to modify this product in any way without written authorization.
Unauthorized modification could void the user's authority to operate this product.
Power
This set operates on a DC supply provided by the AC-DC adaptor, the voltage is as
indicated on the label on the back cover. Use only the AC-DC adaptor supplied with
the set and never apply an AC mains to the set directly. The AC-DC adaptor operates
on an AC mains supply, the voltage is as indicated on the label of the AC-DC
adaptor.
a. Connect the DC plug of the AC-DC adaptor to the 12V socket of the set.
b. Connect the AC-DC adaptor and its power cord.
c. Connect the power cord to an AC mains.
In the event of thunderstorms or power cuts, please pull out the mains plug of the
AC-DC adaptor and the aerial plug. Do not allow anything to rest upon or roll over the
power cord, and do not place the set where the power cord is subject to damage.
22
3

Advertisement

Table of Contents
loading

Summary of Contents for NEC NLT-17WF

  • Page 1 NLT-17WF Model: Owner’s Manual Warnings WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING : To reduce the risk of electric shock do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
  • Page 2: Table Of Contents

    Never remove the back cover of the TV, this can expose you to high voltage and other hazards. If the TV does not operate properly, unplug it and call your nearest NEC Service Centre. Connect the antenna cable to the connection marked Ant. (on the rear). For best reception, use an outdoor antenna.
  • Page 3: Supplied Accessories

    INDEX UPDATE TIME REVEAL 6. PC IN cable 5. Owner’s manual Model: NLT-17WF Owner’s Manual 7. PC Audio IN cable Controls 1. ON/OFF Switches TV set on or off. 2. MENU Displays a menu. 3. + PR - (Programme Up/Down) Selects a programme or a menu item.
  • Page 4: Remote Controller 8~9

    Controls All the functions can be controlled with the remote controller. Some functions can also be adjusted with the buttons on the side panel of the set. Remote controller Before you use the remote controller, please install the batteries. 1. POWER Turns the TV on from standby or off to standby mode.
  • Page 5: Basic Operation

    Basic Operation Turning the TV On and Off Standby Setup: The AC-DC adapter and the AC power cord must be set up and connected to have the TV in standby mode ready to be turned on. Press the ON/OFF button on the side panel of the TV to go into standby mode.
  • Page 6 Setting up TV Programme Once you have preset the programmes, you will be able to Auto Programme use the PRxy or NUMBER buttons to scan the programmes you programmed. Programmes can be tuned using automatic or manual System modes. Start Auto Programme All programmes that can be received are stored by this Position :...
  • Page 7: Picture Control

    Setting up TV Programme Programme Edit Programme Edit This function enables you to delete or skip the stored programmes. Also you can move some programmes to other programme numbers or insert a blank programme data into the selected programme number. Delete 1.
  • Page 8: Sound Control

    Sound Control You can select your preferred sound setting; Flat, Music, Sound Movie or Speech. You can also adjust the sound frequency of equalizer, balance. If you switch AVL to on, Equalizer the set automatically keeps on an equal volume level even Balance if you change programmes.
  • Page 9: Other Functions

    Other functions You can control other functions; Clock, Blue Back, Auto Special Sleep, Childlock, Radio, ARC and SLEEP TIMER menu. Clock Blue Back Clock Auto Sleep Setting the clock is necessary in order to use the various Childlock timer features of the TV. You can set automatic TV On or Radio Off time.
  • Page 10: Radio Control

    Radio Control This function is possible only when the set is in Radio mode.(Radio mode is displayed when the Setting for special menu is radio On.) Radio Setup Mode 1. Use TV/AV button on remote controller to select Frequency Radio mode. Programme 2.
  • Page 11: Special Teletext Function

    TELETEXT Special TELETEXT functions MENU Functions TEXT Changes Teletext mode Selects double height text. Press this button to enlarge the top half of the page. SIZE Press this button again to enlarge the bottom half of the page. Press this button again to return to the normal display. Stops the automatic page change, which will occur if a Teletext page consists of 2 or more sub pages.
  • Page 12: A/V Inputs

    External Equipment Connection When connecting to other equipment, please ensure you turn the main switch OFF to prevent any damage to the equipment. A/V INPUT 1. Connect the A/V out jacks on a VCR to A/V-IN jacks on the TV. COMPONENT 2.
  • Page 13: Connecting Pc As Monitor 25~28

    Connecting PC as monitor Sound adjustment Sound 1. Press the MENU button. Equalizer 2. Select the Sound menu, then press VOLÏq. Balance 3. Press the PRxy button to select the desired sound item; Equalizer, Balance, AVL, Surround or Surround Sound Mode Sound Mode.
  • Page 14: Product Specification

    SIZE HOLD INDEX b. Technical specifications are subject to change without UPDATE TIME REVEAL Model NLT-17WF Horizontal size 520(520) mm Thickness Main body (With stand) Height 320(365) mm Weight 4.85(6.2) kg DC 12V/5.0A PAL-BG, I, DK / SECAM-BG, DK / NTSC-M...
  • Page 15: Troubleshooting

    84A Richmond Rd, Keswick, 5053 Western Australia Perth 45 Sarich Court, Osbome Park 6017 For Service in outer areas, please contact your NEC retailer for the address of the nearest Authorised NEC Service Centre NEC Australia Pty. Ltd. Home Electronics Group...
  • Page 16 500-028Z041028...

Table of Contents