Troubleshooting
Problem
Check item
• Insert the AC power cord plug securely in AC power
No picture on screen and no sound
outlet.
from speakers.
• Make sure the LCD TV is not in the standby mode
(The POWER/Standby indicator is red.)
• Check the brightness setting of the display.
No picture/No picture from AV
terminal.
• Lamp may have malfunction.
• Check the sound setting.
• Make sure the sound is not muted.
Picture is displayed, but no sound
from the speakers.
• Make sure the connectors of the optional speaker
system are securely inserted.
Picture is too light.
• Make sure COLOR and CONTRAST settings.
• Make sure BRIGHTNESS setting is not set too low.
Picture is too dark.
• Check to see if BRIGHTNESS setting.
• Lamp may have malfunction.
• Change the batteries.
• Make sure the infrared transmitter window is not
Remote control does not work.
receiving strong light such as light from fluorescent
lamps.
• The reception may be weak.
The TV picture is not sharp.
• The state of the broadcast may also be bad.
The TV picture moves.
• Make sure the antenna is facing the right direction.
• Make sure the outside antenna is not disconnected.
• Make sure the antenna is facing the right direction.
The TV picture is doubled/tripled
• There may be reflected electric waves from
(Ghosting)
mountains or buildings.
• There may be interference from automobiles, trains,
high voltage lines, neon lights, etc.
The TV picture is spotted.
• There may be interference between the antenna cable
and power cable. Try positioning them further apart.
• Is the unit receiving interference from other devices?
Transmission antennas of radio broadcasting stations
There are stripes on the screen or
and transmission antennas of amateur radios and
colors fade.
cellular phones may also cause interference.
• Use the unit as far apart as possible from devices
that may cause possible interference.
• Unplug the power cord of the adaptor from the AC
Power button does not respond.
outlet to turn off and reset the unit.
PC image not centered.
• Check the horizontal/vertical position setting.
• Check Clock and phase settings.
PC image not clear or has stripes.
Try using 'Auto' function setting.
26
NEC Australia Pty. Ltd.
ABN 86 001 217 527
Home Electronics Group
NEC Service Centres
New South Wales
Sydney
184 Milperra Rd, Revesby 2212
Newcastle 120 Parry Street, Newcastle West 2302
Victoria
Melbourne Unit1/6, Garden Road, Clayton, 3168
Queensland
Brisbane
Unit 4/305 Montague Road, West End, 4101
Southport
Shop 1, 48 Ferry Road, Southport 4215
South Adelaide
Adelaide
84A Richmond Rd, Keswick, 5053
Western Australia
Perth
45 Sarich Court, Osbome Park 6017
For Service in outer areas, please contact your NEC retailer for the
address of the nearest Authorised NEC Service Centre
NEC Australia Pty. Ltd.
Home Electronics Group
244 Beecroft Road EPPING 2121
Tel:131-632
Fax:(02) 9877 2353
(02) 9780 8688
(02) 4926 2466
131-632
131-632
(07) 5591 3670
(08) 8375 5710
(08) 9445 5901
Need help?
Do you have a question about the NLT-20 and is the answer not in the manual?
Questions and answers