Setting Up Tv Programme; Auto Programme; Manual Programme - NEC NLT-20 Owner's Manual

Setting up TV Programme

Once you have preset the programmes, you will be able to
use the PRxy or NUMBER buttons to scan the
programmes you programmed.
Programmes can be tuned using automatic or manual
modes.

Auto programme

All programmes that can be received are stored by this
method. It is recommended that you use Auto programme
during installation of this set.
1. Press the MENU button.
2. Select the Setup menu.
Then press the VOLÏq button.
3. Select the Auto programme menu.
Then press the VOLÏq button.
4. Press the PRxy button to select System menu.
5. Select a TV system with the VOLÏq button;
BG : (Germany/Asia/M.East/Africa/Australia)
I : (UK/Hong Kong/South Africa)
DK : (CIS/China/East Europe)
M : (KOREA, USA, PHILIPPINES)
6. Press the PRxy button to select Storage from.
7. Select the beginning programme number with the
VOLÏq button or NUMBER buttons.
8. Select START, then press the VOLÏq button.
Press Menu button to finish Auto programme.
9. Press the MENU button to finish Auto programme.
10. Press the TV/AV button to return to normal TV
viewing.
12
Auto programme
System BG
Storage from 1
Start
POWER
1 2 3
4 5 6
7 8 9
* 0
*
PSM SSM I/II
MENU TV/AV
PR
VOL VOL
OK
SLEEP TV/PC
PR
TEXT/MIX Q.VIEW LIST
UPDATE TIME REVEAL HOLD
NS-201
Setting up TV Programme

Manual programme

Manual Programme lets you manually tune and arrange the
programmes in whatever order you desire. Also you can
assign a programme name with 5 characters to each
programme number.
1. Press the MENU button.
2. Select the Setup menu.
Then press the VOLÏq button.
3. Select Manual programme menu.
Then press the VOLÏq button.
4. Press the PRxy button to select System.
5. Select a TV system with the VOLÏq button.
BG : (Germany/Asia/M.East/Africa/Australia)
I : (UK/Hong Kong/South Africa)
DK : (CIS/China/East Europe)
M : (KOREA, USA, PHILIPPINES)
6. Press the PRxy button to select Channel. Press
the VOLÏq button to select V/UHF or Cable as
required. If possible, select the programme number
directly with the NUMBER buttons.
7. Press the PRxy button to select Search. Press the
VOLÏq button to commence searching. If a channel
is found the search will stop.
8. Press the PRxy button to select NAME, press the
VOLÏq button to allocate the location and use
PRxy button to select the character(blank, +, -,
Alphabet A to Z, Numeric 0 to 9).
9. If this Programme is the one required, press the
PRxy button to select Storage. Select the desired
programme number with the VOLÏq button or
NUMBER buttons.
10. Press the OK button to store it. The display Stored
will appear.
To store another Programme, repeat steps 5 to 10.
11. If the TV picture reception is not good, then do the
fine tuning. Select FINE, then adjust the received
signal with the VOLÏq button.
Manual programme
System BG
Channel V/UHF 5
Fine
Search
Name 0 0 0 0 0
Storage 1
POWER
1 2 3
4 5 6
7 8 9
0
* *
PSM SSM I/II
MENU TV/AV
PR
VOL VOL
OK
SLEEP TV/PC
PR
TEXT/MIX Q.VIEW LIST
UPDATE TIME REVEAL HOLD
NS-201
13