External Equipment Connection
A/V OUT
1. Connect the Audio outputs(L, R) of the TV to Audio-IN(L, R) of another
displayer or the amplifier system
- If you connect the amplifier system, you can also play the TV sound through
the stereo amplifier system.
2. Connect the Video output of the TV to Video IN of another displlayer.
Note : If you press the mute button, only the sound of the TV's speaker's are
switched off.
DC 15V
PC/DTV INPUT
H/P S-VIDEO
A/V-IN
A/V-OUT
ANT.
VIDEO
L
R
VIDEO
L
R
Displayer
S-VIDEO INPUT
If using an S-VIDEO source, the picture
quality will be improved over a video source.
1. Connect the S-VIDEO output of a
VCR to the S-VIDEO input on the TV.
2. Connect the audio cables from the
S-VIDEO VCR to the L (MONO) R
inputs on the TV.
3. Select S-VIDEO mode by pressing the
TV/AV button repeatedly.
4. Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
Headphone jack
Insert the headphone plug to the headphone jack on the TV. You can listen to the
sound through the headphone; no sound form the speaker on the TV. To adjust the
headphone volume, press the VOLÏq button. If you press the MUTE button, the
sound from the headphone is turned off.
DC 15V
PC/DTV INPUT
22
DC 15V
PC/DTV INPUT
H/P S-VIDEO
A/V-IN
A/V-OUT
ANT.
VIDEO
L
R
VIDEO
L
R
Displayer
Amplifier
DC 15V
PC/DTV INPUT
H/P S-VIDEO
A/V-IN
A/V-OUT
ANT.
VIDEO
L
R
VIDEO
L
R
S-VIDEO VCR
Headphone
H/P S-VIDEO
A/V-IN
A/V-OUT
ANT.
VIDEO
L
R
VIDEO
L
R
Connecting PC as monitor
VGA/DTV INPUT
1. Connect the VGA IN cable
ANT.
PC/DTV INPUT
(D sub jack) from the monitor
output socket of the PC to the
PC/DTV input socket of the set.
2. Connect the Audio cable from the
PC to the A/V IN(L(MONO), R) of
the set.
3. Press the TV/AV button to select PC mode.
4. Switch on the PC, and the PC screen appears on the set.
The set can be operated as the PC monitor.
Resolution
Horizontal
Mode
Resolution
frequency (KHz)
frequency (Hz)
640X480
31.5 KHz
640X480
35 KHz
640X480
37.9 KHz
VGA
640X480
37.5 KHz
43.5 KHz
640X480
720X400
31.5 KHz
800X600
35.2 KHz
800X600
37.9 KHz
800X600
48.1 KHz
SVGA
800X600
46.9 KHz
800X600
53.7 KHz
576p
50Hz
HDTV
1080i
50Hz
Note:
a. If the set is cold, there may be a small "flicker" when the set is switched on. This is
normal, there is nothing wrong with the set.
b. Some dot defects may appear on the screen, like Red, Green or Blue spots.
However, this will have no impact or effect on the monitor performance.
c. When resolutions are displayed that are not native to the panel resolution,
text may appear choppy or lines may appear to be bold or thicker than others.
To minimize, choose a resolution similar to the panel.
H/P S-VIDEO
A/V-IN
A/V-OUT
DC 15V
VIDEO
L
R
VIDEO
L
R
Vertical
60 Hz
67 Hz
72 Hz
75 Hz
85 Hz
70 Hz
56 Hz
60 Hz
72 Hz
75 Hz
85 Hz
23
Need help?
Do you have a question about the NLT-20 and is the answer not in the manual?
Questions and answers