Storing Data In Memory Channels - Alinco DX-R8T Instruction Manual

3-2 Storing Data in Memory Channels

Procedure
Example: Storing 7.050.00 MHz and LSB into memory channel "188" in bank A.
Please note that a symbol  stands for "blank" bank and nothing appears on the display.
Setting data
1.
Set the data to be stored in VFO mode.
Selecting a memory channel
2.
Press the [FUNC] key. The memory
number starts to flash.
3.
Pressing [V/M] key switches the bank
(blank), A and B, select the A bank.
4.
Press the [/] keys to select memory
channel "188". In this case, [] key
works faster to select "188".
A n e m p t y c h a n n e l i s s h o w n w i t h a
flashing [Memory No.].
5.
Press and hold the [V/M] key for more
then 1 second while "FUNC" is on the
display, a beep sounds, then flashing
number disappears to complete the
memory programming.
6.
If a previously programmed channel is
selected in step 4, the memory channel
will be overwritten by executing the
procedure in step 5.
Read P.28 for memory operation.
NOTE: To avoid overwriting, use overwrite protection in the Set mode menu 01, P.51.
Use of the free utility software makes memory editing easy and convenient.
Please visit alinco.com for details.
3. Memory Channels

PS0633 DX-R8T/E
27