Specifications - Alinco DX-R8T Instruction Manual

Specifications

General
Reception frequency range (MHz)
Memory channels
Receiving wave modes
Antenna impedance
Frequency stability
Power supply voltage
Ground method
Current drain
Operating temperature
Dimensions
Weight
Receiver type
Reception SSB
sensitivity CW
AM
FM
First mid-frequency
Second mid-frequency
Selectivity SSB, CW, AM(narrow)
AM, FM
Spurious rejection ratio
Low frequency output
RIT variable range
All speci cations are subject to change, with technological developments, without any notice.
62
DX-R8
T : 150KHz to 29.99999MHz E : 150KHz to 34.99999MHz
600 channels
J3E(USB, LSB), A3E(AM), A1A (CW), F3E(FM)
50 Ω
±1 ppm
13.8 V DC ±15% (11.7 to 15.8 V)
Negative ground
1.0 A (max.) 0.7 A (squelched)
-10˚C to 60˚C (+14˚F to +140˚F)
240 (w) × 94 (h) × 255 (d) mm (excluding protrusions)
(9.45" (w) × 3.7" (h) × 10" (d))
240 (w) × 100 (h) × 293 (d) mm
(9.45" (w) × 3.94" (h) × 11.54" (d))
Approx. 4.1 kg
Double superheterodyne
(0.15 to 1.8 MHz) 0 dBu (1 uV)
(1.8 to 30 MHz) -12 dBu (0.25 uV)
(0.15 to 1.8 MHz) +20 dBu (10 uV)
(1.8 to 30 MHz) +6 dBu (2 uV)
(28 to 30 MHz) -6 dBu (0.5 uV)
71.75 MHz
455 kHz
2.4 kHz/-6 dB 4.5 kHz/-60 dB
6 kHz/-6 dB 18 kHz/-60 dB
More than 70 dB
More than 2.0 W (8 Ω, 10% THD)
±1.2 kHz
PS0633 DX-R8T/E