Other Functions; Interference Reducers; If Shift - Alinco DX-R8T Instruction Manual

5. Other Functions

5-1 Interference Reducers

Introduction
As explained in previous chapters, this receiver has built-in functions to reduce interferences. This section
explains how to use these functions to reduce interference in detail, although you may be already familiar
with these features.

IF SHIFT

The IF SHIFT function is used to shift the IF pass band without changing the receive frequency. If there is an
interference signal near the received signal, rotate the ΔIF control knob to get the interference signal out of
the receive band.
0
IF SHIFT
NOTE: • This function can shift the IF pass band within a range of only ±1.5 kHz.
• This function will be disabled in the AM and FM modes.
• This function can also be used to adjust the audio quality to suit your preferences.
40
Pass band
Interference signal
0
IF SHIFT
Interference signal
0
IF SHIFT
PS0633 DX-R8T/E