Menu 10. [/] Keys Repeat Setting; Menu 11. Func Key Resume Timing Setting; Menu 12. Rx Lamp Setting - Alinco DX-R8T Instruction Manual

6. Parameter Setting Mode
[/] Keys Repeat Setting
Menu 10.
Function for pressing [/] keys can be set to a key-repeat to increase/decrease values continuously (and faster)
while holding down the key.
1.
T h e d e f a u l t i s [ K R P T - O N ] t h a t i s
k e y - r e p e a t f u n c t i o n . P r e s s i n g a n d
holding [
change values like frequency etc.
2.
Rotate the main dial clockwise to select
"ON" or "OFF".
KRPT-OF
FUNC Key Resume Timing Setting
Menu 11.
The FUNC key resume timing can be set to manual or auto as below:
FUNC-MN (manual resume) ............ FUNC key operation remains until the next key is pressed.
FUNC-AT (Auto) .................................... FUNC key operation will be canceled automatically and FUNC indication on the
1.
The default is [FUNC-MN].
2.
Rotate the main dial clockwise to select
[FUNC-AT]. Automatic FUNC operation
is activated.
FUNC-MN
NOTE: It is recommended to use "MN" setting until you get familiar with the operations
RX Lamp Setting
Menu 12.
An LED in the top left of the display can be lit when receiving a signal or squelch is unmute.
1.
The default setting is "LED-OFF".
2.
Use the main tuning dial to select the
color of the light (green or red).
LED-OFF
56
] key will continuously
 / 
KRPT-ON
display turns o when no operation is performed within 5 seconds.
FUNC-AT
of DX-R8.
LED-GRN LED-RED
(green) (red)
PS0633 DX-R8T/E