Table of Contents
Advertisement
< When 6CH DIRECT is selected, the DSP MODE and the AUTO
button do not work.
1
If a digital device is connected to DIGITAL IN terminals,
select desired decoding mode by pressing the AUTO
button.
Each time the AUTO button is pressed, the decoding mode is
changed as follows:
IN-AUTO (default):
The appropriate decoding mode is selected automatically.
Usually, select this.
IN-DTS:
Select this only when the input signal is DTS.
IN-PCM:
Select this only when the input signal is PCM.
< The AUTO button works only when the function is set to
VIDEO or CD and the digital input is selected.
< When IN-AUTO is selected, noise may be heard during
playback of a DVD recorded in DTS format. In this case, select
IN-DTS.
< If the selected decoding mode does not match with the input
signal, the digital input display will blink and no sound will be
heard.
2
Select the desired surround mode by pressing the DSP
MODE button.
20
Surround Mode
Each time the DSP MODE button is pressed, the surround
mode changes.
A
When Dolby Digital signals are input and IN-AUTO is selected,
the surround mode is set to DOLBY DIGITAL automatically. If
you press the DSP MODE button, you can select one of the
following surround modes:
When the source is Dolby Digital 5.1-channel:
DOLBY DIGITAL
When the source is Dolby Digital 2-channel:
DOLBY PRO LOGIC II MOVIE, DOLBY PRO LOGIC, DOLBY
PRO LOGIC II MUSIC, DOLBY PRO LOGIC II MATRIX, DOLBY
PRO LOGIC II CUSTOM
B
When DTS signals are input and IN-AUTO or IN-DTS is
selected, the surround mode is set to DTS automatically. The
DSP MODE button does not work.
C
When the source is PCM (2-channel stereo) and IN-AUTO or
IN-PCM is selected, or when analog stereo signals are input,
you can select one of the following surround modes:
DOLBY PRO LOGIC II MOVIE, DOLBY PRO LOGIC, DOLBY
PRO LOGIC II MUSIC, DOLBY PRO LOGIC II MATRIX, DOLBY
PRO LOGIC II CUSTOM, MATRIX, THEATER, HALL,
STADIUM, CHURCH
< When the DSP MODE button is pressed once, the current
surround mode is displayed. Press the DSP MODE button
repeatedly to select any other surround mode.
< When you press the DSP MODE button, the sound is cut off
for a moment.
< DOLBY DIGITAL can be selected only during playback of a
DVD disc recorded in DOLBY DIGITAL format.
< Press the STEREO button to cancel the surround mode.
Hide quick links:
Advertisement
Table of Contents
